Shanghai Lingmao Electronic Science and Technology Co., Ltd.
NEC

Board-Level EMC Scanning and Analysis System

Combines NEC EMIStream software with 4EM200/4EM500 scanners for PCB-level EMC analysis. EMIStream runs design-rule and plane-resonance checks; the scanners apply the magnetic-probe (MP) method (IEC 61967-6) to map near-field noise and locate sources, cutting rework and cost.

View technical details
Board-level EMC scanning and analysis system: NEC EMIStream software with 4EM200/4EM500 magnetic-field scanners
CAPABILITIES

What this solution covers

01

Magnetic Probe (MP) scanning method: the near-field scanning method first developed by NEC; its probe specifications were adopted by IEC as the international standard IEC 61967-6, complied with by both the 4EM200 and 4EM500.

02

EMIStream design-stage analysis: EMI rule checks and power/ground-plane resonance analysis can be performed at the early PCB design stage without specialized EMI knowledge; functions include layout/routing rule checks, ground-plane resonance simulation, far-field emission simulation, ESD rule checks and PI analysis.

03

Graphical noise visualization: magnetic-field scan results are overlaid on the board layout and shown as a color heat map, locating noise sources and problem points (components, traces, pins) on the measurement surface as well as on inner and back layers.

TECHNICAL REFERENCE

Technical details & configuration

Source: NEC (Nippon Electric Company). Values have been checked against the official NEC EMIStream documentation and 4EM200/4EM500 technical data. Confirm software editions, probe configuration, scanning range and supply configuration for the project.

Configuration limits are stated per row.
ItemPublished informationSource
System compositionEMIStream simulation software + 4EM200/4EM500 EMC scanner + magnetic-field probes[1]
Test methodMagnetic Probe (MP) scanning method, compliant with IEC 61967-6[1]
4EM200 measuring rangeX/Y/Z = 200×200×100 mm, θ = 0/90° (2 angles); step size 0.1 mm[1]
4EM500 measuring rangeX/Y/Z = 500×500×210 mm, θ = -90° to +90°; step size 0.01 mm[1]
Control interfaceUSB; 4EM200 power supply AC 100–240 V, 50/60 Hz[1]
Confirm before selection

Provide the PCB size and layer count, the noise/resonance frequency range to be analyzed, the target standard (if any), required scanning resolution and available measuring instruments. A general scanning range does not demonstrate compliance over the entire frequency range.

FAQ

Questions before you start

Do the listed values apply to every configuration?

Source: NEC (Nippon Electric Company). Values have been checked against the official NEC EMIStream documentation and 4EM200/4EM500 technical data. Confirm software editions, probe configuration, scanning range and supply configuration for the project.

What should I prepare for a technical discussion?

Provide the PCB size and layer count, the noise/resonance frequency range to be analyzed, the target standard (if any), required scanning resolution and available measuring instruments. A general scanning range does not demonstrate compliance over the entire frequency range.

How do I request documentation?

Email linkall@inlinkall.com with the product name and test requirements, or call +86 21 52831768. The online enquiry form is not yet available. Documentation is supplied in its available language.

Sources · checked 2026-11-20
  1. NEC EMIStream 官方产品页
  2. NEC EMIStream 官方手册(PDF)

Legacy information may not reflect current availability. Confirm the final model, options and specifications in the technical agreement.

LinkAll

Customer service

For product enquiries and technical support, please contact us:

Telephone
021-52831768 / 52833853
Email
linkall@inlinkall.com