Simultaneous sampling: an independent ADC and track-and-hold circuit per channel, sharing a common clock and trigger, eliminates inter-channel phase shift for correlated multi-signal measurements.
DT9816 Series Data Acquisition Card
The DT9816 series is a low-cost simultaneous multifunction USB DAQ device from Data Translation (now part of Digilent): 6 single-ended 16-bit analog inputs at 50/150/750 kS/s per channel depending on model, with 8 digital I/O lines and one counter/timer. Independent ADCs per channel eliminate phase shift for correlated measurements. It comes in a rugged shielded enclosure with screw terminals, and a board-only OEM version is available.
What this solution covers
Multifunction integration: 6 16-bit analog inputs, 8 digital inputs/8 outputs and one counter/timer, ±10 V/±5 V ranges, and 50/150/750 kS/s per channel depending on model.
Easy to use and integrate: USB-powered with no external supply, a rugged shielded enclosure with screw terminals, a board-only OEM version, and free QuickDAQ software.
Technical details & configuration
Source: DT (Data Translation; MCC and DT are now part of Digilent). Specifications below have been checked against the source DT9816 selection table and the official user manual; this is an older ECON-series product, while the current website lists MCC USB-1608G/USB-230 and other series. Confirm exact model availability and version for the project.
| Item | Published information | Source |
|---|---|---|
| Analog inputs | DT9816/A/S: 6 SE, 16-bit resolution | [1] |
| I/O range | ±10 V or ±5 V | [1] |
| DT9816 | 6 SE, 16-bit, ±10 V/±5 V, 50 kS/s/ch, 8 in/8 out DIO, 1 C/T | [1] |
| DT9816-A | 6 SE, 16-bit, ±10 V/±5 V, 150 kS/s/ch, 8 in/8 out DIO, 1 C/T | [1] |
| DT9816-S | 6 SE, 16-bit, ±10 V/±5 V, 750 kS/s/ch, 8 in/8 out DIO, 1 C/T | [1] |
| DT9817-H | 28 high-drive digital I/O, 1 C/T | [1] |
| DT9817-R | 8 in/8 out isolated high-drive digital I/O, 1 C/T | [1] |
Provide the required model (DT9816 / -A / -S), channel count and sample rate, input range, whether a board-only OEM version is needed, digital I/O and counter application, and operating system and software requirements (QuickDAQ, DASYLab, LabVIEW, MATLAB, etc.). Refer to the Digilent official site for current replacement models.
Questions before you start
Do the listed values apply to every configuration?
Source: DT (Data Translation; MCC and DT are now part of Digilent). Specifications below have been checked against the source DT9816 selection table and the official user manual; this is an older ECON-series product, while the current website lists MCC USB-1608G/USB-230 and other series. Confirm exact model availability and version for the project.
What should I prepare for a technical discussion?
Provide the required model (DT9816 / -A / -S), channel count and sample rate, input range, whether a board-only OEM version is needed, digital I/O and counter application, and operating system and software requirements (QuickDAQ, DASYLab, LabVIEW, MATLAB, etc.). Refer to the Digilent official site for current replacement models.
How do I request documentation?
Email linkall@inlinkall.com with the product name and test requirements, or call +86 21 52831768. The online enquiry form is not yet available. Documentation is supplied in its available language.
Legacy information may not reflect current availability. Confirm the final model, options and specifications in the technical agreement.