Shanghai Lingmao Electronic Science and Technology Co., Ltd.
TESEQ

DCC-Set 电容耦合盒

The DCC-Set capacitive coupling box is used for direct injection testing on automotive signal/control lines. It provides multiple capacitance options for DCC (direct capacitive coupling) fast- and slow-pulse tests, in compliance with ISO 7637-3 (2007) and GB/T 21437.3-2012.

View technical details
DCC-Set Capacitor Coupling Box
CAPABILITIES

What this solution covers

01

Standard compliant: Designed to ISO 7637-3:2007 and GB/T 21437.3-2012 (Road vehicles — electrical disturbances from conduction and coupling — Part 3: electrical transient transmission by capacitive and inductive coupling via lines other than supply lines).

02

DCC direct injection: For direct capacitive coupling injection onto automotive signal/control lines, supporting DCC-method fast- and slow-pulse testing.

03

Multiple capacitance options: Available in several capacitance values (e.g. 100 pF, 100 nF, 470 pF, 0.1 μF) to suit different pulses and harness requirements.

TECHNICAL REFERENCE

Technical details & configuration

The source page provides a product introduction and photos only, without a structured parameter table. Values are not published on this page unless verified. See notes in each row.

Configuration limits are stated per row.
ItemPublished informationSource
Product formCapacitive coupling box (DCC-Set) in a protective carrying case, model FLB-B-DCCSET[1]
Test methodDCC direct capacitive coupling method for transient emission coupling onto lines other than supply lines[1]
ComplianceISO 7637-3:2007; GB/T 21437.3-2012[1]
Kit contentsCoupling boxes, BNC coaxial cables, test clips, ground lead and carrying case[1]
Confirm before selection

please provide the standard edition, required capacitance values (for fast/slow pulses), connector type and EUT harness type; capacitance options on this page are identified from product photos — configuration and availability must be confirmed with the manufacturer per project.

FAQ

Questions before you start

Do the listed values apply to every configuration?

The source page provides a product introduction and photos only, without a structured parameter table. Values are not published on this page unless verified. See notes in each row.

What should I prepare for a technical discussion?

please provide the standard edition, required capacitance values (for fast/slow pulses), connector type and EUT harness type; capacitance options on this page are identified from product photos — configuration and availability must be confirmed with the manufacturer per project.

How do I request documentation?

Email linkall@inlinkall.com with the product name and test requirements, or call +86 21 52831768. The online enquiry form is not yet available. Documentation is supplied in its available language.

Sources · checked 2026-11-20
  1. 凌茂旧站产品资料 / LinkAll legacy product informationLegacy website reference

Legacy information may not reflect current availability. Confirm the final model, options and specifications in the technical agreement.

LinkAll

Customer service

For product enquiries and technical support, please contact us:

Telephone
021-52831768 / 52833853
Email
linkall@inlinkall.com